@Rubio Tsao many thks

Hi,  Could you confirm that your version U-boot save environment variable at default adresses from NXP documentation as below when yocto image is burned on emmc ?  CONFIG_ENV_SIZE=0x400...

Hi Michael Shih-Lung Chien,   Sorry for your inconvenience.   We will contact you by email asap. Thanks BR Anson

@Anson Ruan HI Anson, I bought I-Pi SMARC RB5 devkit last month, today I try to dowload OS image, there is not OS image on web page https://www.ipi.wiki/pages/i-pi-smarc-rb5-download. Can you tell ...

Hi Sir, please try to updating the Adlink MRAA patch as the link below, we no longer see SPI failure issue  http://ftp.adlinktech.com/0001-adlink_mraa_px30.zip  

Hi Sam,   Sorry for your inconvenience.   We will contact you by email asap. Thanks BR Anson

Hi Sir, I just got an  I-Pi SMARC RB5 dev kit. and I followed this page to setup the dev kit. https://www.ipi.wiki/pages/rb5-docs?page=HowToSetup.html But it leads me to a page without any...

Hello, I've been spending several days trying to figure why the network performance was so low on the dev kit (Q80-26). I noticed that even as little as 1 Gbps of traffic over the LAN port was eno...

Hi Sir,   did you follow the steps in ipi wiki for Debian MRAA and run adlink test application?

Hello Magesh,   the instruction is correct after confirming, I used Ubuntu 22.04.1 LTS (5.15.0-1028) did you follow the content as below link? https://www.ipi.wiki/pages/1200-docs?page=Ser...

Hi Tu Ken, I use linux minicom regards Magesh  

Hello Magesh,   may I ask what host users you use? Linux or Windows?

Hi Steve, see below pin definition for 40p RPI compatible connector: https://www.ipi.wiki/pages/imx8mp-docs?page=UserInterfaces.html Function MRAA Number MRAA number Function 3...

Hi! I have the i-pi smarc px30 board and i am trying to use the spi communication example code. I installed the Debian image (LEC-PX30-IPi-SMARC-Debian10-xfce-2v7-20210219) from the website, whic...

Does the IMX8MP support an I2C Channel on the 40-pin expansion header.  In the user interface diagram it depicts I2C available on the expansion header as well as the RP3 compatible header.&nbs...

@Olof Johansson Based on Ian's reply at https://www.ipi.wiki/community/forum/topic/99770/does-the-micro-fan-connector-on-the-module-work I'm planning to create a few adapters to connect to the modu...

I'm working on updating the firmware and hoping I can tweak the ACPI tables to allow more performance. For example I think it should be possible to enable the "Max Performance" setting, while at th...

Thanks! I'll try again with a less hacky solution (i.e. this time soldering wires).

Thanks @Master of SMARC  Sorry for the delay reply.  I was trying to get the board setup. Buying Smarc-1200 will I get access to neuro pilot SDK ? I dont see download link in the page yo...

On following the serial connection documention, I receive garbled output. The cable itself is fine. Is the instruction ok ?