Posts made by Allumallu Susmitha

• micro USB serial connection

  Hi Henrik, Sorry for the late reply.  We were in a holiday for Chinese new year the whole week At this moment Serial connection is possible only through MRAA pins (6,8,10), please check this...

  posted in Hardware

  AS

  Allumallu Susmitha
  2/5/22, 12:15 PM
• Support for Transpose Convolutions in NNAPI delegate / NPU

  Hi Christian, We need to look deeper into this, but NNAPI delegate support is maintained by NXP, It would be possible to have some limitations, you can contact NXP support for more details.  ...

  posted in Software

  AS

  Allumallu Susmitha
  11/18/21, 1:27 AM
• Expanding the storage options in the AVA

  Unfortunately, this chasis doesn't support it

  posted in Hardware

  AS

  Allumallu Susmitha
  11/12/21, 5:44 AM
• Expanding the storage options in the AVA

  AVA Developer Platform supports NVMe storage. There are two M.2 slots on the carrier. SATA ports are not supported on this platform. There are 3 HDD bay's on the chasis as shown in the above pictur...

  posted in Hardware

  AS

  Allumallu Susmitha
  11/11/21, 8:54 AM
• Can window 11 work on AVA Developer Platform?

  Yes, Windows 11 already up and running out of the box on AVA Developer platform https://twitter.com/i_pi_devkits/status/1452898324902604806  

  posted in Software

  AS

  Allumallu Susmitha
  11/4/21, 3:39 AM
• No HDMI output

  Hi Christian, You can check the Jumper settings on the board to cross check they were placed correctly. Please refere this link to check your jumper settings, this might be the issue for HDMI out...

  posted in Hardware

  AS

  Allumallu Susmitha
  10/13/21, 2:43 AM
• When will it be available?

  Very Soon!! 2021 Q4

  posted in General

  AS

  Allumallu Susmitha
  10/4/21, 2:56 AM
• Port connection on AVA Developer Platform

  Hi kevin, Please click this link to know all the details of avaialble port https://docs.ipi.wiki/COMHPC/ava/CarrierIntroduction.html

  posted in Hardware

  AS

  Allumallu Susmitha
  10/4/21, 2:54 AM
• Input Power

  Hi Joel, The Board can support 12V power input. Regarding the Input plug(DC Jack), its already pass the Vibration proof test Have a good day and all the best for your application

  posted in Hardware

  AS

  Allumallu Susmitha
  9/16/21, 2:12 AM
• Yocto build issue

  Hi Julien https://github.com/ADLINK/meta-adlink-nxp/wiki/01-1.-Build-Yocto-Image_imx8mp Follow this documentation step no. 2.2 Required Setting in conf/local.conf $ vi <build_dir>/conf/loc...

  posted in Software

  AS

  Allumallu Susmitha
  8/11/21, 1:26 AM
• Is there an input for a battery to maintain the RTC?

  @Joel Kautu  Hi Joel, This is PX30 forum, I see that your questions are on IMX8MP, can you please raise the questions on IMX8MP forum on our WIKI page, So we can support accordingly   ...

  posted in Hardware

  AS

  Allumallu Susmitha
  8/10/21, 8:59 AM
• Is there an input for a battery to maintain the RTC?

  @Joel Kautu  Can you also reply us, if you're working on PX30 or IMX8MP?  

  posted in Hardware

  AS

  Allumallu Susmitha
  8/10/21, 3:19 AM
• Is there an input for a battery to maintain the RTC?

  @Joel Kautu  The below answers are for I-Pi SMARC plus carrier 1. RTC drift over 36 hours 2. RTC battery time keeps up for over 1 year up 3. The minimum test criteria we did was for 3 years

  posted in Hardware

  AS

  Allumallu Susmitha
  8/10/21, 2:59 AM
• CAD models

  @Marnus Pretorius    Hi Can you try this link https://hq0epm0west0us0storage.blob.core.windows.net/%24web/public/SMARC/LEC-iMX8MP/3D_Files/IPi-SMARC%20Plus%2055%20ASSY%20Heat%20spread...

  posted in Hardware

  AS

  Allumallu Susmitha
  8/10/21, 1:52 AM
• Yocto build issue

  Hi Julien, Could you please tell us, if you're using uboot from our github, or you built your own uboot?

  posted in Software

  AS

  Allumallu Susmitha
  8/10/21, 1:48 AM
• Wi-Fi and Bluetooth interface

  Hi Joel,   The unit always comes with RTC battery   Thank you

  posted in Hardware

  AS

  Allumallu Susmitha
  8/10/21, 1:39 AM
• CAD models

  @Marnus Pretorius    https://hq0epm0west0us0storage.blob.core.windows.net/$web/public/SMARC/LEC-iMX8MP/3D_Files/IPI-SMARC%20Plus%2055%20ASSY%20Heat%20spreader.zip I have uploaded the s...

  posted in Hardware

  AS

  Allumallu Susmitha
  8/2/21, 1:38 AM
• CAD models

  Hi Marnus,   Here is the link where you can check our CAD models https://hq0epm0west0us0storage.blob.core.windows.net/$web/public/SMARC/LEC-iMX8MP/3D_Files/IPI-SMARC%20Plus%2055%20ASSY%20He...

  posted in Hardware

  AS

  Allumallu Susmitha
  7/26/21, 12:33 AM
• USB boot

  Hi Tetsuro Yes, this device is USB bootable. But you need to use micro USB OTG cable to boot the board with Yocto/Ubuntu/android.  The recovery option is just to enable UMS boot again. You c...

  posted in Hardware

  AS

  Allumallu Susmitha
  7/20/21, 7:52 AM
• Wi-Fi and Bluetooth interface

  Hi Joel   You can use I-PEX Connector (MHF IV) for external antenna to use wi-fi and Bluetooth

  posted in Hardware

  AS

  Allumallu Susmitha
  7/20/21, 3:21 AM