Posts made by Master of SMARC

• Temperature/Fan query

  Hi Martin,  please ensure there is good airflow over the passive heatsink, if not you can connect a fan to the fan header on the side of the boad. It should not lock up, but throttle, did yo...

  posted in Hardware

  

  Master of SMARC
  10/29/24, 12:53 AM
• running STM code on Hexagon DSP

  Hi Enrico   RB5 is also using the QRB5165 SOC, so it would be identical to what Modal AI did, as they seem to have everything on Github, maybe worth to take a look? https://github.com/modala...

  posted in Software

  

  Master of SMARC
  7/29/24, 12:37 PM
• Legacy Support

  Hello Ali Legacy boot is no longer supported

  posted in General

  

  Master of SMARC
  6/21/24, 1:53 AM
• How to flash Ubuntu OS?

  Alas, you cannot. The image on the canonical website is made for the much slower eMMC storage, we are using ultra-fast UFS storage. There would have to be a lot of changes on the images to make i...

  posted in Hardware

  

  Master of SMARC
  4/23/24, 6:44 AM
• How to flash Ubuntu OS?

  At this moment we do not have a Ubuntu image available for download this will come, but no clear timeline yet, please keep checking the downloads 

  posted in Hardware

  

  Master of SMARC
  4/17/24, 6:56 AM
• debug access port (JTAG/SW)

  Hello,  The JTAG headers are on the debug connector located on the top of the module please shoot an email to henri.parmentier@adlinktech.com, i will send you the correct pinout

  posted in Hardware

  

  Master of SMARC
  2/27/24, 7:09 AM
• Using GPIOs in Windows 10 IoT Enterprise LTSC

  Hi Rob,  SEMA 4.0 supports the LEC-EL module you have on your side,  https://github.com/ADLINK/sema-linux/releases/tag/rel_sema4_ec_1v1 Installation notes and link to latest releases w...

  posted in Hardware

  

  Master of SMARC
  2/15/24, 7:52 AM
• ALL DRIVERS FOR I-PI SMARC 1200 BOARD WITHOUT UART CABLE

  Hi Ngor,  WE HEAR YOU LOUND AND CLEAR.. But something is off here, as you say you are using X86_64 AMD CPU  Can you please try to explain clearly what the MediaTek Genio kit has to do ...

  posted in Software

  

  Master of SMARC
  1/24/24, 4:01 AM
• Could SMARC RB5 support M.2 SSD ?

  Peter,  Looking at the partnumber you provided this is a SATA drive, note that you need NVMe storage  Sadly SATA is on it's way out in most of the arm based SOC's     

  posted in Hardware

  

  Master of SMARC
  11/14/23, 6:21 AM
• Could SMARC RB5 support M.2 SSD ?

  Hi Peter,  It certainly does, there are 2 PCIe lanes going to the M.2 connector which would give you a very decent speed  other 2 PCIe lanes go to connector B, this could be 5G modem fo...

  posted in Hardware

  

  Master of SMARC
  11/13/23, 5:22 AM
• PCIe bifurcation

  Hi James,  I think the manuals of module and carrier might clarify this for you  Module > https://www.adlinktech.com/Products/Computer_on_Modules/COM-HPC-Server-Module/COM-HPC-ALT?la...

  posted in Hardware

  

  Master of SMARC
  9/27/23, 4:50 AM
• Elkhart Lake LAN speed not optimized

  It came to our attention that the LAN speed on the I-Pi SMARC Elkhart lake is not up to expectation  Our apologies for that! Good news, it takes 2 minutes to fix this, as it is a simple BIOS...

  posted in Hardware

  

  Master of SMARC
  9/27/23, 4:02 AM
• does the kit comes with image flashed ?

  Hi Magesh No, the kit comes empty, please use following instructions to flash the OS you downloaded https://www.ipi.wiki/pages/1200-docs?page=BootFromUFS.html at the moment this is only Yocto, A...

  posted in Hardware

  

  Master of SMARC
  6/12/23, 1:53 AM
• APU in SMARC 1200

  Hello Magesh, For AI-based tasks common INT8, INT16, or  FP16 models can run. you can use tensorflow Lite > GPU and Digital Signal Processor (DSP) arm-NN > Cortex-A CPUs, Arm Mali GPU...

  posted in Software

  

  Master of SMARC
  6/7/23, 3:28 AM
• HOW I ADD DOCKER IN YOCTO IMAGE FOR IMX8MP

  Hi Kumar,  Best step to start with this is the docker docs page https://docs.docker.com/engine/install/binaries/ I think in your case you could start with binaries, if this is not working y...

  posted in Software

  

  Master of SMARC
  6/7/23, 3:11 AM
• Wifi and bluetooth connection issues

  Hi Kevin,  You are correct about the antenna's, for full gain those need to be connected. As a dev. kit the antenna's are not included by default. If you want to have reception that goes fu...

  posted in General

  

  Master of SMARC
  6/7/23, 3:07 AM
• Network booting

  Hi Sam, please send me a PM, I will send you there the download link . LEC-EL 1.07.10 is the last version with PXE support.  Sorry for the wait, sometimes silicon vendors are delaying plans...

  posted in Software

  

  Master of SMARC
  5/25/23, 3:30 AM
• Could use some advice on selecting I-Pi SMARC IMX8M Plus board.

  Hello Cor,  the 8M plus SOC is well able to handle all the tasks you list, but not in it's SMARC version. We go down to carrier with a single i2s, and connect to a fairly simple Wolfson WM89...

  posted in Software

  

  Master of SMARC
  5/25/23, 3:08 AM
• Camera and LVDS display used on the Carrier board

  As LVDS and also CSI cameas follow a defined standard there is no limitation in which ones to use. There is however a fair amount of software work needed to adapt device tree, implement the camera...

  posted in Hardware

  

  Master of SMARC
  5/22/23, 1:29 AM
• VAT included?

  Hi Gonazalo,  All prices are ex-VAT as they are for export. You will, depending on where you live, have to pay VAT on your side.  

  posted in General

  

  Master of SMARC
  5/12/23, 3:39 AM