USB boot

• TO

  Tetsuro Okuyama

  7/20/21, 6:38 AM

  Hi all, 
  
  Is this device USB bootable?
  Please tell me "recovery" option in this page.
  
  Best regards, 

  0 likes 0 likes Liked Like

  ---

  4
  Posts

  341
  Views

  Reply

  ---

• AS

  Allumallu Susmitha Staff member

  7/20/21, 7:52 AM

  Hi Tetsuro

  Yes, this device is USB bootable. But you need to use micro USB OTG cable to boot the board with Yocto/Ubuntu/android. 

  The recovery option is just to enable UMS boot again. You can check our webpage for instructions on how to prepare eMMC

   

   

   

   

   

  1 likes 0 likes Liked Like

  ---

• TO

  Tetsuro Okuyama

  7/21/21, 12:36 AM

  Hi @Allumallu Susmitha
  
  Thank you for your reply!
  
  >Yes, this device is USB bootable. 
  >The recovery option is just to enable UMS boot again. You can check our webpage for instructions on how to prepare eMMC
  
  I saw this page, and please tell me a little more detail.
  In IMX8MP reference manual(link:need NXP account) section 6.1.2 Boot modes(P.742),
  which boot mode of the "SMARC IMX8M Plus" is same with USB Serial Download mode(BOOT_MODE 0001 in IMX8MP reference manual).  
  
  Or if I plugged the micro USB OTG cable, this board automatically go into USB Serial Download mode?
  
  
  Best regards,

  0 likes 0 likes Liked Like

  ---

• HV

  Henrik Vendelbo

  12/14/21, 7:02 PM

  @Allumallu Susmitha What does this mean?
  
  But you need to use micro USB OTG cable to boot the board with Yocto/Ubuntu/android. 
  
  Does it boot over the OTG cable?

   

  0 likes 0 likes Liked Like

  ---