@henri parmentier Hi Henri Yes I have tried running those commands. The problem is that it doesn't recognise the device. The device doesn't even show up if I run the "sudo lspci" command

Marq,  For the apt issue, please try below  Try to recreate the apt# sudo apt-get clean# sudo rm /var/lib/apt/lists/*# sudo rm /var/lib/apt/lists/partial/*# sudo apt-get update,or rem...

Marq,  This is a yocto kernel running, I need to ask our SW guys for the kernel headers We have now the IMX8M plus certified as SystemReady which would allow you to deploy generic Linux imag...

Yes you can boot from eMMc. Here is the link.

If I want to factory reset my device with a fresh image of Ubuntu is there an easy way to force the board to boot the e-mmc as an SD card over the micro-usb port?

I am trying to setup my I-Pi for a robotics projet and am running into issues all over the place. Hopefully you guys can suggest some options for me to continue to use this board otherwise I will j...

Hello Henrik You can check our User Interface page here for the LVDS pin.

Hi Yegan  Did you try to connect from command line? it might be that no connection manager is in the image Howto for connection here > https://askubuntu.com/questions/294257/connect-to-wi...

@karamo kanagi Does the wifi also not work if you build Ubuntu using the method here on your support page? Is there a way to get the wifi to work on Ubuntu? I've got an M.2 Intel AC-9260 wifi card ...

Hi Martin,      Sorry for the late reply.     I would expect that you get the AVA system with pre-installed Ubuntu.    here is the account/password: adlink/adli...

@Paschalis Pelitaris, Currently WiFi is not enable in Ubuntu. Its stated on our download page here. Thank you.    

What type of connector is used for the 30 pin LVDS socket/plug?

Hello, I have an IMX8M Plus with WiFi and an Ubuntu image taken from here. Now the problem is that the WiFi is not recognized in the OS. Is there no support for it under Ubuntu? Thank you in adv...

@Henri Parmentier What is the log-in details for this image?

@Henrik Vendelbo Solution.  "Dip switches (bank of 4) are located near the Ethernet ports. Flip them to determine where the board should boot from" Putting this text before the obscure ...

@Allumallu Susmitha What does this mean?But you need to use micro USB OTG cable to boot the board with Yocto/Ubuntu/android. Does it boot over the OTG cable?  

Broke out the board. Everthing looks very nice. Well done making U-Boot expose boot partition as MSD. I tried to follow the Getting Started documentation. It has holes... 1) Downloaded Yocto imag...

Hi, I have started the preinstalled Ubuntu on the AVA Developer Platform and conntected the VGA port to my monitor. Could you provide the credentials to log in?

Thanks Henri.

Hi Manuel. 1.5mm no problem, verified.