Can window 11 work on AVA Developer Platform?
Can window 11 work on AVA Developer Platform?
@Allumallu Susmitha Hi Allumallu. That's it. The jumper for HDMI Coupling was set to AC out-of-the-box, but it obviously needs to be set to DC. At least in our setup. Works now. Thanks a lot for yo...
Hi Christian, You can check the Jumper settings on the board to cross check they were placed correctly. Please refere this link to check your jumper settings, this might be the issue for HDMI out...
Hi. Not seeing any output on HDMI. We tried two boards, multiple cables and monitors, and the Yocto and Ubuntu images. But no output on HDMI whatsoever. We can see from the USB/UART probe that the ...
Hi kevin, Please click this link to know all the details of avaialble port https://docs.ipi.wiki/COMHPC/ava/CarrierIntroduction.html
What are the available port connections on AVA Developer Platform?
Can you tell me when the product will be available?
Hi Joel, The Board can support 12V power input. Regarding the Input plug(DC Jack), its already pass the Vibration proof test Have a good day and all the best for your application
Hi I would like to use the I Pi SMARC in my application but I am using 12V, Is there an input range for the Board or it can only use 19V. Regarding the Input plug. (DC Jack) do you have a mo...
Your order has been fulfiled, you will get tracking number by email later today!
Hi Joel, the power consumption of this kit is under 7W.
Hi what is the power consumption of the I-Pi SMARC IMX8M Plus ?
@Allumallu Susmitha I used the Github tutorial and it's finally working, thanks for your help !
@Allumallu Susmitha it could be a good idea to update the tutorial on the I-Pi documentation...
@Allumallu Susmitha I am using the IMX8MP. two concerns that were not addressed in your previous answer. How many seconds does the battery drift after 36 hours? how long does th...
Good day as per previous discussion please advise delivery on the above as it is urgent. Been trying to get hold of somebody via email but with no luck.
Hi Julien https://github.com/ADLINK/meta-adlink-nxp/wiki/01-1.-Build-Yocto-Image_imx8mp Follow this documentation step no. 2.2 Required Setting in conf/local.conf $ vi <build_dir>/conf/loc...
