Any news regarding this issue ? 

Hi O,  Thank you to let us know your test result and feedback. BR, Rubio 

I understand that in the course of edk2 testing you will brick the thing multiple times and than USB updates are no longer possible. We will get you a DB40 and setup instructions. These pages shoul...

That is great Rebecca I will forward you to our moderator of the MD files. They are privatly  hosted on Github. We will do this by email however.

I found out that the source code for the documentation on this site is available at https://github.com/ADLINK-COM/docs-ipi-wiki, and I'd like to contribute.  However the files in that repo ap...

Hi Sam, please send me a PM, I will send you there the download link . LEC-EL 1.07.10 is the last version with PXE support.  Sorry for the wait, sometimes silicon vendors are delaying plans...

Hello Cor,  the 8M plus SOC is well able to handle all the tasks you list, but not in it's SMARC version. We go down to carrier with a single i2s, and connect to a fairly simple Wolfson WM89...

We for sure we are welcoming such remarks, it will lead to fast improvement of our documentation. We often receive customers at our facility to audit our production facility. They will point out th...

It doesn't look like the updated BIOs image is up yet, just checking I haven't missed it / looking in the wrong spot.

@Lauryn Hsu Thanks. I received my board a couple of days ago and have already performed a firmware upgrade using a USB thumb disk. I have a Dediprog programmer and would like to get a DB40 board i...

Thank you, the above link to reflash eMMC is helpful. I have tried flashing a lighter version of Ubuntu on eMMC of imx8mp, i.e. ubuntu server 22.04.2 LTS but I am unable to see anything on the dis...

@Rebecca Cran    Hi Rebecca, To clarify, the DB40 should be considered an optional item rather than a mandatory one. As you may have noticed, there is an additional device labeled "Ded...

Schematics of the COM HPC carrier can be found on this page https://www.ipi.wiki/pages/download-ava-developer-platform it explains any connection from PCIe to BMC As a side note : we still do no...

Hi, For our full-motion simulator project we need a powerfull processor board to do some main control plus head/body tracking and multi channel 3D audio rendering.We think the I-Pi SMARC IMX8M Plu...

@Olof Johansson    Hi Olof,   There the SMBus has route bewteen PCIe and BMC, but for application as fecthing of temperatures information...etc, before command executing by BMC, ...

I've noticed some issues with the documentation, and was wondering if there's any process for submitting ideas for changes? For example, I got a different heatsink/fan from what's shown in https:/...

@Olof Johansson Assuming it was strictly followed, I wonder if the PICMG COM-HPC Design Guide might be any use? https://www.picmg.org/openstandards/com-hpc/

Hi, Are the SMBus pins on the PCIe connectors on the carrier connected to either the BMC or the main processor on the systems? GPUs and other cards often expose out of band temperature monitoring,...

Since I expect to be working on the Ampere UEFI firmware for my Ampere Altra Dev Kit, I've been reading https://www.ipi.wiki/pages/aadk-docs?page=HowToUseDediprogFlashEDK2.html in case I need to re...

@Ruler of COM Thanks! Could you provide a link from the wiki page to Ampere's AVL please?