Did a bit of research and the LGA4926 socket that the Ampere Altra uses is not AM4 compatible and will not work with the retail ADATA XPG Levante 240 Cooler. Unfortunately the bracket used for the ...

If your M.2 SSD is not being detected by Ubuntu 20.04, there are a few troubleshooting steps you can try: Check the BIOS: Make sure the M.2 slot is enabled in the BIOS settings. You may also want ...

Hello @Kothandaraman Kannadasan, Does the ADATA XPG LEVANTE 240 ARGB CPU Cooler you linked ship with a cooling block bracket that is compatible with the Ampere Altra CPU bracket? At first gla...

Dear @Neha Gupta, Depending on how much load the Ubuntu desktop image has, the processor might slow down. The reason why the eMMC can't be detected as a storage device on your host device is that...

I request some support for debugging some errors for the I-Pi SMARC IMX8MPlus (51-77A07-0A30) SD card boot settings. I flashed the prebuild Ubuntu image from https://www.ipi.wiki/pages/downlo...

Hi JUD,              Thanks for sharing, I will reply you ASAP, thanks. BR Anson

Hi Sir,          It's good to receive from you, could you please share me your loacation and email address to me ? anson.ruan@adlinktech.com Thanks BR Anson

Hi Anson , I use the I-Pi SMARC IMX8M Plus 2G .  rgds

Please provide ECCN for Ampere Altra developers platform: Q80-2.6 GHz so I can make the order.   Best,

Hi Anthony.    Could you please share us your business model? I will also check with our engineer for more information. I think below info might helpful to take troubleshoot the issue o...

Hi JUD,            Could you please share me what product you are using, it would be very helpfull to solve your problem, thanks! BR Anson 

Hi ,  I have generated and instelled libcap-dev, licap-bin packages for your yocto image in order to use capabilities . I have also actived options kernel .config , however , it seems that t...

Hi Steve,              We are currently doing related tests for Kirkstione we now have Hardnott yocto image, you can download it on our IPI-WIKI. Thanks  ...

Hi Diabate,                    It's nice to meet you in the air, I have a few questions that I would like to ask you to answer, this will improve ...

@Kothandaraman Kannadasan  It is weird because after each reboot the mac address starts with 00:30:64 which os a reserved range for ADLINK.  I try to change the U-boot environnement fro...

Hello, I'm trying to generate a minimalistic dts config in order to have only the lvds display to be active while shutting down any other peripherals and functionalities (including cores, usb, phy...

Dear @O. JUD, Module MAC addresses are not set by us. It is by default that the MAC address will change randomly, but if you would like a fixed MAC address, you can do so.

Hi ,  Do you have any update regarding the way to fix mac adress on the SMARC card ?  I really need to know if booting the system (u-boot or OS ) is mandatory in order to set interfaces...

Dear @T. I. , If the image is not flashed successfully this kind of issue may happen. Please try to flash the image again as mentioned here Change the boot option as shown here If still it doe...

Still interested.