@Master of SMARC I found my issue, the "DP1_AUX_SEL" signal requires a pull-up resistor. The SMARC design guide, V2.1.1 does not include this in their guide and the ADLink LEC-EL says this ...
@Master of SMARC I found my issue, the "DP1_AUX_SEL" signal requires a pull-up resistor. The SMARC design guide, V2.1.1 does not include this in their guide and the ADLink LEC-EL says this ...
Is it possible to enable HDMI on the DDI2 interface running under ubuntu? The evaluation board uses a displayport to HDMI converter on the DDI1 video output, but the SMARC has a native HDMI i...