Dear @Laurent Rouvet, Please refer to the attached image. For more details, go to the download page and download the schematic diagram of IMX8MP.

Dear @Sven Brandau, The Yocto image won't support USB Utils commands by default. So, you can't use "lsusb" command. Instead of that, you can use the following commands to check your USB drive and o...

Hi, I'm trying to test USB OTG in host mode - just connecting a USB device like a memory stick or USB/Serial (FTDI) via USB OTG cable to the USB OTG port of the board. If I do that nothing happen...

Hi Kothandaraman Kannadasan,Could you give us the part number of this connector?Thank you

Dear @chiahui Han, AVA/AADP currently supports the Windows 11 image partially only. You won't be able to access all of the features. The project is still in the development stage. Please follow the...

Dear @O. JUD, Sorry for the delayed response. Please check the following information on your targeted device. For Enabling Wi-Fi on Yocto build with Ubuntu rootfs,       In targ...

Dear @Ajith Joseph, Sorry for the delayed response. During the process of building the Yocto image, this happens frequently. The NXP repository network issue may sometimes cause it to fail. It may ...

Can you show device manager for SMMU v3(or IOMMU & nvidia GPU device nodes ? Or we can remote login to try Windows 11

I build the image using bitbake imx-image-full

Dear @Ajith Joseph, How did you build the Yocto image? Did you use Zeus or Hardknott?

After downloading Yocto download for the Elkhart Lake system, I was surprised to find a USB drive did not match my expectations.   The Yocto download appears to generate another installation...

I get following error message while building Yocto Image - imx-image-full  Looks like this repository is not public.  ERROR: nxp-wlan-sdk-git-r0 do_fetch: Fetcher failure: Fetch command...

Dear @Anooj Gopi, We are currently working on the Android BSP source for IMX8MP. Hopefully, it will be done by the end of next week. Once it's done, we'll get back to you. We apologize for any inco...

Hello,  I'have  build yocto boot part as described in the docs and i added an Ubuntu rootfs .  have copied  modules folder from modules--5.4-r0-lec-imx8mp-20221026135341.tgz i...

Dear Support Team, From where can I download the Android BSP source code for I-Pi SMARC IMX8M Plus? We have to do customization for the PoC for which we need access to the Android BSP (Kernel/HAL/...

Dear @O. JUD, It is possible to fix the mac address. Please follow the below steps, Boot into U-BOOT (emmc boot) and type the following commands,            =>...

Dear @O. JUD, Please refer to the following page (https://www.ipi.wiki/pages/downloads-imx8mplus). Please download the schematic file of IMX8MP and see the page number-17 for more details.

Dear @Laurent Rouvet, we will add them in the future.

Could you add the connector reference into the documentation?

Hi ,  Is there a way to fix the mac address on EVK board I-Pi SMARC Plus IMX8M ?  I'm using Yocto a build image from adlink-lec-imx8mp-yocto-hardknott_1v2.xml  I read about efuse ...