1. Forum
  2. I-Pi SMARC
  3. I-Pi SMARC 1200
  4. Software
  5. install AioT-Tools failed

install AioT-Tools failed

  • pz

    hello:

            i follow the document：https://www.ipi.wiki/pages/1200-docs?page=AIoTToolInstallation.html#AIoTToolInstallation.html

           but encounter the failed as below：

    •     zhangk@zhangk-virtual-machine:~$ aiot-config 
          fastboot: OK 
          udev rules: OK (md5: a3b2767b42ee01d7c62bf394400528ae)
          Serial device write access: FAIL 
          You may experience some write permission error('open(/dev/ttyACM0): Permission denied')
          Consider adding your user to the 'dialout' Linux group (sudo adduser `whoami` dialout)

          I also try exec with root privilege，also failed：

    • zhangk@zhangk-virtual-machine:~$ sudo .local/bin/aiot-config 
      Traceback (most recent call last):
        File "/home/zhangk/.local/bin/aiot-config", line 33, in <module>
          sys.exit(load_entry_point('aiot-tools', 'console_scripts', 'aiot-config')())
        File "/home/zhangk/.local/bin/aiot-config", line 22, in importlib_load_entry_point
          for entry_point in distribution(dist_name).entry_points
        File "/usr/lib/python3.10/importlib/metadata/__init__.py", line 969, in distribution
          return Distribution.from_name(distribution_name)
        File "/usr/lib/python3.10/importlib/metadata/__init__.py", line 548, in from_name
          raise PackageNotFoundError(name)
      importlib.metadata.PackageNotFoundError: No package metadata was found for aiot-tools

          I make sure I follow the documentation exactly every step of the way，and the host is Ubuntu 22.04.3 LTS

  • KK

    Dear @peter zhang,

    Type the following commands in the terminal,

    $ echo 'SUBSYSTEM=="usb", ATTR{idVendor}=="0e8d", ATTR{idProduct}=="201c", MODE="0660", $ GROUP="plugdev"' | sudo tee -a /etc/udev/rules.d/96-rity.rules
    $ echo -n 'SUBSYSTEM=="usb", ATTR{idVendor}=="0e8d", ATTR{idProduct}=="201c", MODE="0660", TAG+="uaccess" SUBSYSTEM=="usb", ATTR{idVendor}=="0e8d", ATTR{idProduct}=="0003", MODE="0660", TAG+="uaccess" SUBSYSTEM=="usb", ATTR{idVendor}=="0403", MODE="0660", TAG+="uaccess" SUBSYSTEM=="gpio", MODE="0660", TAG+="uaccess" ' | sudo tee /etc/udev/rules.d/72-aiot.rules
    $ sudo udevadm control --reload-rules
    $ sudo udevadm trigger
    $ sudo usermod -a -G plugdev $USER

    Now, reboot the device and try the below command to make sure the setup is done properly.

    $ aiot-config

    0 likes
  • pz

    hi @Kothandaraman Kannadasan 

        i have try the cmd，but encounter the same error either

    best regards；

    0 likes
  • KK

    Hi @peter zhang, Sadly, we cannot duplicate what you did. You can, however, refer to the solution from here. It might be helpful to you.

    https://askubuntu.com/questions/210177/serial-port-terminal-cannot-open-dev-ttys0-permission-denied 

    0 likes
Please login to reply to this topic!

Participants