IN SHORT I need to know what yocto meta-layers are used to build a bootable yocto image for an I-Pi SMARC IMX8M Plus board (I-Pi LEC-IMX8MP-Q-N-2G-32G-BW/US to be specific) .   DETA...

Hi Patrick, We've received your email about these questions. Our PM team will reply you by email soon. Thanks!

How do the gpiochipN pin numbers map to the physical IO headers? Where is this documented?

https://www.adlinktech.com/Products/Computer_on_Modules/SMARC/LEC-AL   LEC-AL might be suitable for your project.

Hello Ali Legacy boot is no longer supported

Does SMARC Elkhart Lake support both UEFI and Legacy boot option ? 

@Alex Bennée Sorry but I don't know if I can share the document that ADLINK sent me privately, but it's a standard ARM10 header: https://developer.arm.com/documentation/101416/0100/Hardware-...

@Master of SMARC Thanks for your reply.Yes, I have tried canonical Ubuntu last weekend and failed. Lookforward to your Ubuntu image, bacause we have purchased 5 sets of SMARC 1200 and need to test ...

Alas, you cannot. The image on the canonical website is made for the much slower eMMC storage, we are using ultra-fast UFS storage. There would have to be a lot of changes on the images to make i...

@Master of SMARC Can I flash the Ubuntu downloaded from the Ubuntu website?

At this moment we do not have a Ubuntu image available for download this will come, but no clear timeline yet, please keep checking the downloads 

Can I flash the ubuntu os to the UFS?

Dear @Haeseul Shin, Root cause "__stack_chk_guard" refers to a symbol related to stack-checking functionalities in the kernel. [/home/imx8mp/Downloads/driver/cp210x.ko]: This specifies the path ...

Hello, I flashed a Debian Image to the SD Card. and I need CP210x driver for my sensor, but i can not find it. When I execute '$ lsusb', the output is "Cygnal Integrated Products, Inc. CP2102/CP2...

@Alex Wang Thanks! I had trouble using a ARM-USB-TINY-H but was able to successfully run OpenOCD, connect GDB and get debugging working with an ARM-USB-OCD-HL.

Hello @Kothandaraman Kannadasan  First of all, thank you for your reply. Here are the command's results of what you send to execute: dmesg | grep -i Bluetooth"[    0.112085] Bluet...

Dear @André Campos, Enter it as a "root" and follow the instructions below to enable Bluetooth. Bluetooth boot messages # dmesg | grep -i Bluetooth Start and Enable Bluetooth se...

Hello, I'm trying to enable the built-in Bluetooth, but I was not able to do it. I can see on the schematics that the Bluetooth is connected to uart1, and the WiFi is connected to the SDIO. I ...

Hi Rebecca, the JTAG has been enabled. let me get information from our team and update to you early next week.  

Hi Will,  the SPI flash chip at AADK is MX25L25645GMI-08G