Yocto build issue

• JT

  Julien Taveau

  8/9/21, 9:23 AM

  Hi,

  When I use the Ubuntu image, the system boots without any problem. But when I want to use a Yocto image generated following the tutorial it doesn't. I have connected the board to my computer to see what's happening with picocom and I get that :

  Ubuntu image :

  

  Then it boots without any problem.

  Yocto image :

  

  Is it normal that there is a difference between the DRAM rates ?

   

   

   

  1 likes 0 likes Liked Like

  ---

  7
  Posts

  252
  Views

  Reply

  ---

• AS

  Allumallu Susmitha Staff member

  8/10/21, 1:48 AM

  Hi Julien,

  Could you please tell us, if you're using uboot from our github, or you built your own uboot?

  0 likes 0 likes Liked Like

  ---

• JT

  Julien Taveau

  8/10/21, 8:27 AM

  @Allumallu Susmitha I'm using the Yocto build tutorial for IMX8MP in your documentation.

  1 likes 0 likes Liked Like

  ---

• JT

  Julien Taveau

  8/10/21, 3:43 PM

  @Allumallu Susmitha where do I configure the number of RAM gigs in the Yocto building process ?

  0 likes 0 likes Liked Like

  ---

• AS

  Allumallu Susmitha Staff member

  8/11/21, 1:26 AM

  Hi Julien

  https://github.com/ADLINK/meta-adlink-nxp/wiki/01-1.-Build-Yocto-Image_imx8mp

  Follow this documentation step no. 2.2 Required Setting in conf/local.conf

  $ vi <build_dir>/conf/local.conf
  
  # sets the LPDDR4 DRAM size, available options are: LPDDR4_2GB, LPDDR4_2GK, LPDDR4_4GB, LPDDR4_8GB
  UBOOT_EXTRA_CONFIGS = "LPDDR4_2GB"

  0 likes 0 likes Liked Like

  ---

• JT

  Julien Taveau

  8/11/21, 7:51 AM

  @Allumallu Susmitha it could be a good idea to update the tutorial on the I-Pi documentation...

  1 likes 0 likes Liked Like

  ---

• JT

  Julien Taveau

  8/12/21, 8:09 AM

  @Allumallu Susmitha I used the Github tutorial and it's finally working, thanks for your help !

  1 likes 0 likes Liked Like

  ---