Posts made by Manuel Botija

• No PCIe support on Yocto HardKnot

  Hello,  Here is some feedback: # Hardknott -> based on kernel 5.10 ## Image Prep (https://hq0epm0west0us0storage.blob.core.windows.net/%24web/public/SMARC/LEC-iMX8MP/Images/Yocto/LEC-IMX...

  posted in Software

  MB

  Manuel Botija
  3/22/22, 5:08 PM
• No PCIe support on Yocto HardKnot

  Hello, We observe that on Yocto hardknott (which is the official version for the Adlink IMX8), PCIe doesn't work. After some investigation we found out they add proper detection on kernel > 5....

  posted in Software

  MB

  Manuel Botija
  3/16/22, 4:07 PM
• Activate of onboard WiFi in prebuilt Yocto Image

  we are also interested to get this image when the WiFi support is fixed. Please update when ready.

  posted in Software

  MB

  Manuel Botija
  3/16/22, 1:45 PM
• M.2 Slot

  Thanks Henri.

  posted in Hardware

  MB

  Manuel Botija
  12/1/21, 1:33 PM
• M.2 Slot

  Thanks @henri parmentier  The part number you have provided seems to be for the E slot. Can you confirm it is the same for the B slot?  AS0BC27-S30BB-7H I see this connector is 30mm hi...

  posted in Hardware

  MB

  Manuel Botija
  11/30/21, 9:45 AM
• M.2 Slot

  Hi Henri,  Sorry, you mention 5mm. I suppose you mean 1.5mm? Can you send me the part number of the connector you fit by default? Would like to check what is the maximum bottom side height i...

  posted in Hardware

  MB

  Manuel Botija
  11/26/21, 8:59 AM
• M.2 Slot

  Hello! We are looking to use the i-Pi IMX8 plus in a setup where we need to use one of the the M.2 slots. My question concerns the B-key M.2 slot. 1) Can this slot fit a 2242-D5-B module? In par...

  posted in Hardware

  MB

  Manuel Botija
  11/25/21, 8:12 PM